DEUTZ 4902825 injector

ra max.:2 mm; Specific static load factor K0:300 N/mm²; Da max.:124.4 mm; Basic static load rating C0:1760 kN; B:76.759 mm; da max.:90.6 mm; Sealing solution:Triple-lip seals; rb max.:1 mm; Lubricant:Regular relubricatio; Basic dynamic load rating C:585 kN;

A5:20 mm; A1:13 mm; Fatigue load limit Pu:0.475 kN; N:11.5 mm; Limiting speed:1200 r/min; J6:96 mm; Recommended diameter for attachment bolts, mm G:10 mm; Db1:76 mm; d:30 mm; N4:4 mm;

A1:88.9 mm; Bearing:22217 E; Cap bolt:2 x 5/8-11 UNC; Pa:20.5 kN; J max.:279.4 mm; Initial grease fill:218.29 g; Ca:45.796 mm; End plug (suffix Y):EPR 9; A2:127 mm; N1:23.813 mm;

Mass housing washer:0.2 kg; D1:42 mm; r1,2 min.:1 mm; B:7.5 mm; D:78 mm;

G:Tr 630x6; d:630 mm; Locking device:MS 31/630; Mass adapter sleeve assembly:254 kg; Lock nut:HM 31/630; A:6 mm; B1:424 mm; G2:M 8; B5:120 mm; Hydraulic nut:HMV 126E;

Travel:6; Frame Size A:3 3/4 in; Frame Accepts These Shaft Sizes (Bearing Bore):20 mm, 25 mm; Bolt Pattern C:0.55 in; Shaft C/L Distance F:1 2/5 in; Frame Size B:11 in; Bolt Pattern D:1 3/4 in; Height G:2.563 in; Bolt Pattern E:9 in;

Eye bolt:2 x 3/8-16 UNC; A2:193.675 mm; Ca:86.614 mm; J1:85.725 mm; P180°:127 kN; Initial grease fill:481.95 g; J min.:406.4 mm; ba:64.294 mm; R1:87.313 mm; Max. speed for PosiTrac Plus seal:950 r/min;

d:180 mm; Grease:919 kN; Static (Cor):5.5 mm; Oil:89.090 kN; with cylindrical bore:1 700 min-1; Pu:515 kN; B:52 mm; rs (min):2 mm; with tapered bore:2 200 min-1; D:250 mm;

Da:57 max; Dynamic (Cr):19.443 kN; d:30 mm; Pu:0.508 kN; D:62 mm; rs:1 mm; Weight:0.24 kg; Grease:11 000 min-1; B:20 mm; Oil:13 000 min-1;

Grease:9350 kN; D:720 mm; d:440 mm; with tapered bore:400 min-1; Dynamic (Cr):12 mm; with cylindrical bore:330 min-1; rs (min):6 mm; Oil:666.120 kN; Pu:4480 kN; Static (Cor):22.3 mm;

B:80.169 mm; L:355.6 mm; S:0.794 mm; J min.:266.7 mm; J max.:298.45 mm; J1:60.325 mm; H:190.5 mm; H1:95.25 mm; Basic dynamic load rating C:325 kN; H2:57.15 mm;

Designation associated G design radial shaft seal with a low cross-sectional height:G 25x35x4; Ew:35 mm; Mass needle roller and cage assembly:0.065 kg; Fw:25 mm; Limiting speed:17000 r/min; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 25x35x4; Fatigue load

B:90 mm; Calculation factor X:0.6; Calculation factor A:14.5; da min.:442 mm; r0:2.5 mm; D1 ≈:550 mm; Calculation factor Y0:0.58; d1 ≈:490 mm; ra max.:4 mm; r1,2 min.:5 mm;

P90°:49.8 kN; ba:30.163 mm; Cap bolt recommended tightening torque:149.1 N·m; RG:3/8 NPT; h:49.212 mm; Appropriate attachment bolt size G:0.75 in; J min.:244.475 mm; R1:53.181 mm; H2:31.75 mm; Cap bolt:2 x 5/8-11 UNC;

da:73.025 mm; A2:173.037 mm; R2:30.163 mm; P150°:32 kN; Bearing:22317 EK; S:4.763 mm; Adapter sleeve assembly:SNW 117x2.7/8; Bearing limiting speed:3800 r/min; Cap bolt:2 x 3/4-10 UNC; End plug (suffix Y):EPR 10;